ST210 Galvanometer Motor with ST Servo

A galvo motor, short for galvanometer motor, is a type of rotary motor used for precise positioning of mirrors in optical applications. These motors are known for their high speed, accuracy, and reliability. They are commonly used in laser scanning systems, such as those found in medical imaging, micromachining, and laser marking.

Galvo motors work by using a moving magnet rotor and a high-accuracy position detector. This allows for fast and precise positioning of mirrors to deflect laser beams. The motors are equipped with an internal position detector that generates a signal corresponding to the motor shaft rotation, facilitating closed-loop servo control of the motor.

These motors are highly versatile and can be configured for various applications, including biomedical imaging, confocal microscopy, and laser-assisted medical treatments.

A servo, short for servomechanism or servomotor, is a rotary actuator or linear actuator that allows for precise control of angular or linear position, velocity, and acceleration. It consists of a motor coupled to a sensor for position feedback. It also requires a relatively sophisticated controller, often a dedicated module designed specifically for use with servomotors.

ST210 Galvanometer Motor plus STServo I is a complete solution for laser scanners. With two sets of ST210 and STServo I, users can achieve X+Y two-dimensional scanning. The price is for a two-dimensional scanner set.

ST210 Galvo Motor — Specifications

Parameter Unit Specifications
Input Beam Aperture mm 3 ~ 7
Moment of Inertia g∙cm2 0.018
Force Constant N∙mm/A 2.7
Coil Resistance Ω 3.6
Coil Inductance µH 70
Max. Continuous Current A 1.5
Peak Current A 8
Rise Time ms 0.13
Weight g 18

STSERVO I — Technical Parameters

Parameter Specification
Number of Axis Single
Analog Input Impedance 200k ± 1% ohms (differential)
100k ± 1% ohms (single ended)
Position Output Impedance 1K ± 1% ohms (for all other observation outputs)
Position Input Scale Factor 0.5 V/mech degree
1 V/mech degree
2 V/mech degree
Position Input Range Max. ±10 V
Position Offset Range ±5%
Digital Signal Input Range 16 bit DAC
Non-Linearity of 16-bit Digital Input 0.006%
Position Output Scale Factor 0.5 V/degree, 1 V/degree
Temperature Stability of Electronics 20 ppm/°C
Power Supply Requirements ±15 V ~ ±28 V (suggested voltage range DC ±15 V ~ DC ±24 V)
Max. Drive Current Limit 6 A peak (power supply and load dependent)
2 A RMS
Working Temperature Range 0 ~ 50 °C

Please refer to the Data Sheet for detailed specifications, outline drawings and pin assignments.

If you need a different configuration or a single-axis set, please ask for a quotation.